概訴證明:煤礦業用阻燃性好有效控制低壓電纜
相信價紹:
運行標 Standards implemented : Q/3210HL33.1-Q/3210HL33.2-2005
參數、各稱及在使用的范圍 Model descriptions and Use scope
型 號Model 名 稱//www.anhdl.com
Descriptions 使 用 范 圍
Scope of application MKVV 煤礦業用聚氯丁二烯隔絕聚氯丁二烯保護套管控電力電纜
PVC insulated PVC sheathed control cables for use in mines 礦山中普遍把控好系統中
General control system in mines MKVV22 煤業用聚氯乙稀絕緣性鏈條鎧裝聚氯乙稀護線套控制低壓電纜
PVC insulated steel tape armored PVC sheathed control cables for use in mines 掘進工作面中正常掌控裝置中會承載千萬沖擊性力和氣壓
General control system cables are under some impact and pressure in the mine MKVV32 礦山用聚氯氯氯乙烯絕緣帶細絲繩鎧裝聚氯氯氯乙烯絕緣護套把控拖鏈電纜
PVC insulated fine steel wire armored PVC sheathed control cables for use in mines 豎井中尋常把握軟件能背負必然拉力
General control system cables are under some pulling force in the mine MKVV42 煤業用聚氯乙稀電絕緣粗絲繩鎧裝聚氯乙稀絕緣護套管理纜線
PVC insulated thick steel wire armored PVC sheathed control cables for use in mines 立井中大部分把控系統性能背負最大拉力
General control system cables are under big impact pulling force in the mine MKVVP 礦山用聚氯氯乙稀接地金屬絲編識手機屏蔽聚氯氯乙稀絕緣護套設定拖鏈電纜
PVC insulated copper wire weave shielded PVC sheathed control cables for use in mines 豎井中強電磁感應騷擾區作應該設定
Strong electromagnetism interference region as general control in mines MKVVP2 礦井用聚氯乙稀絕緣層銅帶屏蔽掉聚氯乙稀保護套調控高壓電纜
PVC insulated copper tape shielded PVC sheathed control cables for use in mines 水井中強電磁能騷擾區作基本保持
Strong electromagnetism interference region as general control in mines MKVVR 礦井用聚氯乙稀耐壓聚氯乙稀絕緣護套軟把握通信電纜
PVC insulated PVC sheathed soft control cables for use in mines 立井必須求轉動商務活動作普遍掌控
Request migration situation as general control in mines MKVVRP 礦井用聚氯乙稀隔熱鐵絲鉤織禁掉聚氯乙稀保護套軟把控高壓電纜
PVC insulated copper wire weave shielded PVC sheathed soft control cables for use in mines 水井時應求手機端且強電磁能要素區作平常保持
Request migration situation and strong electromagnetism interference region as general control in mines
運用優點 Service characteristics
拖鏈電纜導體短期容許的運行水溫
Long-term service temperature of the cable conductor 70℃ 額定輸出功率U0/U
Rated voltage U0/U 450/750V 數據線敷設體溫
Cable laying temperature ≥0℃ 纜線的最少微彎轉彎半徑 Minimun bending radius 無鎧裝層的≥纜線外徑的6倍，有鎧裝層或銅帶屏避的≥纜線外徑的12倍，
Non armored ≥outer diameter of cable 6 times armored layer or copper tape shielded≥outer diameter of cable 12times
有禁掉層的軟電線≥電線外徑的6倍
Shielded layer soft cable ≥ outer diameter of cable 6 times
電覽空間結構舉手圖
IIIustration of cable structure
煤礦業用難燃管理低壓電纜MKVV
型 號 Model 電機額定功率電阻 V
Rated voltage 導體標稱橫截面 mm2 Conductor nominal sectional 0.5 0.75 1.0 1.5 2.5 4 6 10 芯 數 Core number MKVV MKVVP 450/750 - 2-61 2-14 2-10 MKVVP2 - 4-61 2-14 4-10 MKVV22 - 4-61 2-14 4-10 MKVV32 - 7-61 4-61 2-14 4-10 MKVV42 - 16-61 7-61 2-14 4-10 MKVVR 4-61 - - MKVVRP 4-61 4-48 - -
注Note：高性價比的芯數類別Recommendation core series：2、3、4、5、7、8、10、12、14、16、19、24、27、30、37、44、48、52、61芯(core)
電力電纜關鍵新技術耐熱性 Major technical performances
1、 電覽導體直流變壓器熱敏電阻功率及隔熱熱敏電阻功率 Cable conductor DC resistance and insulated resistance
標稱剖面
nominal sectional
(mm2) 導體組成部分
Conductor structure +20℃導體交流電阻值(≤Ω/Km)
Conductor DC resistance at 20℃ +20℃絕緣電阻測試功率電阻功率(≥MΩ·Km)
Insulated resistance at 20℃ 種 類Type 根數/單線標稱的直徑(mm)
core No./ single nominaldiameter 不鍍錫
Untinned 鍍錫
Tinned 0.5 5 16/0.20 39.0 40.1 15 0.75 1 1/0.97 24.5 24.8 12 0.75 2 7/0.37 24.5 24.8 12 0.75 5 24/0.20 26.0 26.7 12 1.0 1 1/1.13 18.1 18.2 11 1.0 2 7/0.43 18.1 18.2 10 1.0 5 32/0.20 19.5 20.0 10 1.5 1 1/1.38 12.1 12.2 11 1.5 2 7/0.52 12.1 12.2 10 1.5 5 30/0.52 13.3 13.7 10 2.5 1 1/1.78 7.41 7.56 10 2.5 2 7/0.68 7.41 7.56 9 2.5 5 50/0.25 7.98 8.21 9 4 1 1/2.25 4.61 4.70 8.5 4 2 7/0.85 4.61 4.70 7.7 6 1 1/2.76 3.08 3.11 7 6 2 7/1.04 3.08 3.11 6.5 10 2 7/1.35 1.83 1.84 6.5
2、線纜以外的別的主要是技術設備功能 Other major technical performances
規格Model:MKVV22、MKVV32、MKVV42、MKVV、MKVVR、MKVVP、MKVVP2、MKVVRP
序 號
Serial number 工程項目
Items 技術性
Technical performances 1 +20℃線芯直流電電阻值器(≤Ω/Km) Core DC resistance at 20℃ 見上表 See above table 2 +20℃接地電阻值器(≥MΩ·Km) Insulation resistance at 20℃ 見上表 See above table 3 5min耐工頻座談會電阻值試驗檢測
5min power frequency alternating current pressure test 芯-芯Core-Core
芯-屏幕Core-Shield
芯-鎧裝 Core-Armor 3000V不熱擊穿 3000V no breakdown 4 單根縱向燒現場實驗 Single wire burning test MT386 5 成束燒現場實驗 Group burning test 非常符合GB/T18380規格中B類成束燒現場實驗條件
Conforms to GB/T18380 standard B kind group burning test
